How and Why to Install a Furnace Filter

Traditionally, furnace filters were built to protectrequired for this job.
the fans and furnace. With the advancement in4. Then locate the filter and gently remove it.
the technology and awareness about the quality5. Check for the dusty buildup on the furnace
of air, a lot of filters are being installed in order tofilter. In case you are not able to see through it,
reduce exposure to the particles which maythen you need to replace or clean it.
affect the health of an individual. These days a6. A lot of times furnaces are fitted with filters
wide range of furnace filters is available in themade of reusable plastic frame. In such case,
market and sometimes it becomes confusingsimply take the filter out and use a water hose
which one is suitable for you.to rinse away the dust. Then, after drying it,
It is very important to clean or replace thereplace it.
furnace filter once in a month. By this you not7. In case you have a filter of disposal cardboard
only increase the efficiency of you furnace, but itframe type, then you need to buy one of the
also helps in reducing the electric bill. Cleaning orsame sizes from your local hardware store
changing the furnace filter is very easy thing.(Wal-Mart, Home Depot or Lowe's) and replace it.
How to clean or replace the furnace filter -:Warnings and Tips -:
1. Firstly check the area ahead of the furnaceTo keep the allergies away from your home, buy
because many a times it is a breeding space foran allergenic reduction filter.
dust particles. Clean the area in front of furnaceReplace you filter after every month or at least
before removing the filter.once in a season so as to keep your home safe
2. Then locate the service panel which is usuallyand healthy.
on the lower front or side of the furnace.Always install a clean filter.
3. Turning off the furnace, gently pull down or popMake sure you turn off the furnace before
open the panel with your hands. Usually no tool isreplacing the filter.