Maintenance on a Forced Air Furnace

If you are like many people, you may have afurnace and get to your filter.
forced air furnace. These are quite popularBefore doing any type of maintenance to your
nowadays due to their being quite energyfurnace, you should turn the power off to the
efficient. However, to keep the energy efficiency,furnace. Do this at your circuit breaker box. Now
you will want to keep the furnace maintained andgo to the furnace and open up the cover in the
clean. This is not too difficult, simply do it once orfront of it. You will need to look for a door or
twice a year and you should keep your costscompartment marked 'filter'.
down.This door may need to be unscrewed or simply
Whether you have a gas or electric furnace, youlift it off of its hooks, look around a bit and see
will need to know how to maintain it to keep upwhat it needs. After you take off this door, look
the high efficiency. This will help you avoid costlyfor the filter. It should be mounted beneath the
repairs and make the furnace last longer.blower motor. Slide it out and check to see if it is
The first thing you should learn how to do ispermanent or disposable, it should say right on it.
check your air filters. Air filters are supposed toIf the filter is disposable, throw it out and replace
keep your air clean and they do this by trappingit with a new one, before throwing it out, be sure
all of the dust and dirt in the air. This means thatto write down the model number so you can be
the more often you clean them, the cleaner yoursure you replace it with the right one. If it is not
air is for you to breathe.disposable, clean it according to the directions on
Your furnace may have a permanent filter, or athe filter. Either way, replace the clean filter in the
disposable filter. If you have a permanent filtersame place you removed the dirty one.
then you will need to clean it the way that theWhile the furnace is open, you may as well so a
manufacturer recommends. A disposable filterfew more things to help improve its lifespan.
needs to be replaces, which is quite easy. EitherVacuum up any debris inside and clean off the
way, you need to know how to get into yourblades well.