Underfloor Heating Installation

Underfloor Heating Installation refers to the- Wood sub-floors- wood floors should be level
installation of electrical heating systems under aand clean, and over laid with the appropriate
floor. When considering electrical underfloorplywood boarding if necessary.
heating, the correct type of installation is required,- Primer and or sealant may need to be used on
as floors are constructed from various types ofboth concrete and wood floors to enable good
materials, and these need to be taken intoadhesion of the adhesives.
consideration when undertaking such a project.With underfloor heating the heat from the
Installation is determined by the type of floor andsystem will radiate both up through the floor and
the type of system to be used. The three maindown into the wooden or concrete sub-floor. For
types of system include:this reason some form of thermal insulation is
- Cables for tiled floorsgenerally required, and a good quality thermal
- Cables for for mats, carpets etcbarrier between the heat source and the sub-floor
- Carbon film for wooden floorscan significantly improve the performance of any
A typical installation for a cable system on asystem. A good quality and thick insulating
concrete sub-floor would be;material will give better results, speeding up the
- Concrete sub-floor followed by flexible tilewarming process and saving money on electricity
adhesive; insulation; cable system; more flexiblecosts.
tile adhesive, and then finished with the desiredUnderfloor heating is fast becoming popular. They
tiles.are easy to use and once installed will provide
Underfloor heating insulation can be carried out bymany years of maintenance free heating. These
specialist installation companies, or any competentsystems are proving very popular because of
DIY enthusiast.their space saving qualities, there's no unsightly
Floor preparation is an important process whenradiators, boilers or other heating appliances, and
installing any underfloor heating system. Floorthe heat is evenly distributed throughout the
preparation for a cable heating system will include :room. There are several different types of
- Concrete sub-floors - new concrete should besystem. Most of them are powered by electricity,
allowed to dry or cure naturally, and a thin layerbut some systems may even use hot water,
of levelling compound may be applied if the floorhowever this requires a completely different type
is uneven.of installation.